A Hydraulic guide tapes is a strip shaped component that guides moving parts. Its main function is guidance. In order to achieve this function, it must support the guided component and guide and correct its motion trajectory. In order to achieve the guiding function well, it also requires isolation, shock absorption, and noise reduction of the guiding components. The Hydraulic guide tape is mainly used in oil cylinders and cylinders, and due to its excellent performance, it has also been widely used in other motion mechanisms.
Main requirements:
Radial support and motion positioning of the piston and piston rod inside the cylinder barrel.
Separate the piston and cylinder barrel, piston rod and guide sleeve as the two pairs of motion pairs to prevent direct friction, wear and tear between the motion pairs. Especially when the sports components are all made of steel, they must be separated to avoid being easily pulled.
The guiding belt also plays an important role in reducing the friction force and frictional work between moving parts, as well as reducing ineffective work and heat.
Reduce system operation vibration and noise.
Application: Strong load-bearing capacity. For oil cylinders with large eccentric loads, this Hydraulic guide tape must be installed, such as various heavy-duty oil cylinders, high-pressure oil cylinders, and large oil cylinders. Tetrafluoroethylene Hydraulic guide tapes has a low coefficient of friction and strong ability to absorb dirt. It is practically applied to all types of oil cylinders, especially high-speed oil cylinders, low friction oil cylinders, and various engineering machinery oil cylinders.
Instructions for use:
Rolled Hydraulic guide tapes are usually cut as needed before installation, and cutting requires attention to two issues: angle and length. The angle should be ensured to be around 45 °, and the length should ensure that the opening size meets the standard.
